ZitatOriginal von Daniel_79
Do you have any link where i can purchase different grips for the EGR77 and EGR66 revolvers?
Hello Daniel,
I will send you a link by PM
Best regards
Alfred
Es gibt 36 Antworten in diesem Thema, welches 5.216 mal aufgerufen wurde. Der letzte Beitrag (
ZitatOriginal von Daniel_79
Do you have any link where i can purchase different grips for the EGR77 and EGR66 revolvers?
Hello Daniel,
I will send you a link by PM
Best regards
Alfred
ALFHA: so sah das damals aus.
wo ich wieviel weggefräst habe siehst du ja auf dem foto.
fertig sahs dann so aus, griffschalen angepasst, loch versetzt und das alte loch zugemacht.
Grüßle Torro
ZitatOriginally posted by flens69
.....Vielleicht sollten Wir mal einen Thread oder Lexikoneintrag hier starten, welcher Griff definitiv auf welche SSW passt......
Wollte das nochmal hervor holen. Vielleicht traut sich einer der Spezialisten (Alfred?), das anzugehen? Wäre eine wirklich hilfreiche Zusammenstellung.
Ich habe einen Hogue-Griff an meiner EGR77. Der passt hervorragend.
Ich habe einen Pachmayr am EGR 77. Es ist die große Ausführung, er passt für mich hervorragend, allerdings ist das Schraubenloch so gerade eben noch passend, die Schraube berührt den Mittelsteg.
Ist bei meiner Variante auch der Fall. Die Schraube geht mit .... etwas schräg einführen, und dann in gerade Richtung drücken .... knapp am Mittelsteg vorbei.
Bei ganz hartnäckigen Fällen habe ich auch schon in warmen Wasser den Griff angewärmt. Die dadurch erreichte, etwas grössere Flexibilität des Griffes, langt zur Montage.
ERMA hat "ab Werk" einen ähnlichen Pachmayr-Griff als Variante angeboten. Nachfolgend ein Ausschnitt aus dem ERMA-Prospekt. Unter dem Pachmayr-Grip Modell ist mein persönlicher Favorit abgebildet, der EGR77 in 4" mit Target-Griff:
Ich habe die originalen vom S&W Mod. 19 dran, die hatte Alfred mir vermacht.
Aahhhh, 4" EGR77 will auch!
@Daniel_79: some more for dreaming: Revolver .380: Erma EGR 77 mit 4"-Lauf
Well! So it has been done! I finally got my sweet 4" Erma EGR77!!
I...don´t know what to say...what an excellent piece of art!!
Every part has been assambled with high precision, this is my very first Erma gun and i understand you Erma collectors.....
The revolver i got is made 1997 (KF) and has i very high finish, no marks,scratches or anything, the gun looks like brand new! Its in much better shape than i thought it would be.
It has original grips and as i said 4 inch barrel, yes it has PTB 601 with the "odd" barrel but when i looked at it, well, its not so bad after all. Im VERY happy with the gun! But of course, PTB 233 looks better.
The owner before me had this gun since new and have only test fired it a couple of times, and it shows... the blued finished is not worn at all, not even on the hammer or trigger.
This gun has serial number: 028526
I bought the gun at Egun at paid 254.98 € (plus versand to sweden about 22€)
Good price?
Here´s some pictures:
/// Daniel
Since i have this beautiful Erma i had to get myself some grips too, i got myself Hogue mongrip for K-frame, round butt.
If you wanna get a good grip to your EGR77 i can recommend this Houge. Its easy to put on and fits good, its also very nice to hold and you get a good grip of your revolver.
/// Daniel
Hello Daniel,
congratulation - it looks very nice!
The grips manufactured by hogue fits perfectly. I prefer hogue`s like this:
I promise you - this was not your last ERMA. One times ERMA .........
Alfred
Hi ALPHA1802,
ha ha ha, yeah..Erma are some pretty hot guns, i already have my EGR77 plus the Geco P217.
Im bidding on on more EGR77 with PTB 233 and 2½ inch barrel!! Just like the one on your picture.
Now thats some good looking grips, i assume thats wood..?
Hello Daniel,
yes that`s correct. It is an exotic hardwood, IMHO it`s named "Goncalo Alves"
Alfred
Zitatyes that`s correct. It is an exotic hardwood, IMHO it`s named "Goncalo Alves"
Könnte gut sein obwohl Goncalo Alves Holz normalerweise rötlicher ist,
aber evtl. liegt das auch am Foto was die Farbe nicht richtig wieder gibt.
Hallo Thomas,
das ist mein Problem. Ich habe mittlerweile etliche Hogue`s aus Holz. Entweder es ist "Goncalo Alves" oder "Coco Bolo" (ich hoffe meine Erinnerung trügt nicht.)
Aber eigentlich egal, optisch sehr ansehbar, und Grifftechnisch ein Handschmeichler.
Gruss
Alfred
ZitatAber eigentlich egal, optisch sehr ansehbar, und Grifftechnisch ein Handschmeichler.
Wie wahr, wie wahr Alfred